Service hotline: +86-318-7868885
1, product model: automatic building with a steel mesh welding machine WZ-2500A
Control system: control panel (button) power system: Motor
2, the use of models: can be used for building with steel mesh, floor pouring with network, supporting in coal mine network to support a variety of products manufacturing.
3, product introduction:
Automatic building with steel mesh welding machine WZ-2500C using synchronous control technology, control of welding and welding time by electronic circuit synchronous control, operation more intelligent and reasonable, and has a pressed, split welding characteristics and automatic building with reinforced row welding WZ-2500A by a step motor hopper, net adopts the elastic rod with the grid location device, making it easier for the fine tuning the mesh, mesh size, high precision, welding can be within the scope of the provisions of arbitrary adjustment, weft by straightening straightening machine cut, warp take plate wire, both can be produced or volumes.
4, specification parameters:
Welding wire diameter 3.0-6.0mm | By the form of continuous filament |
Weft wire pitch 50-300mm | Weft thread form |
Space warp 50-300mm | Rated voltage 380V |
Welding width 2500mm | Rated power 125KVA×6 |
welding speed 60times/min | Outline dimension 2750×3000×1800mm |
Solder joint quantity 48 | Machine weight 3.2T |
Note: the model can be based on customer requirements and other features to increase the size of the other features.